RBSA Responsibilities, Management & Administration

Ìý

RBSA Responsibilities

RBSAs are not centrally managed by the university. Once an RBSA is set up, the Principal Investigator (PI) in conjunction with their unit assumes full responsibility for its ongoing financial management and operational compliance. These responsibilities are collectively referred to asÌýstandard RBSA maintenance.

Mismanaging an RBSA can have serious consequences for the university and can lead to:

  • Jeopardizing CU’s intellectual property
  • Risking current and future federal funding
  • Damaging CU’s overall reputation with the community
  • Exposing the Principal Investigator (PI) to potential personal liability
  • Creating unnecessary and preventable risk for the home unit

Department Research Administrators (DRAs) and Finance staff, along with PIs, hold distinct responsibilities that are essential to the efficient operation of RBSAs. While each group has unique roles, their responsibilities are interdependent, and effective collaboration between DRAs/Finance staff and PIs is necessary to ensure smooth and successful operations.


Primary Responsibilities of Principal Investigators

As aÌýPIÌýoverseeing an active RBSA, you are responsible for maintaining the RBSA and ensuring that all related operations comply withÌýcampus policies and procedures.

This includes:

  • Overseeing the financial and operational integrity of the RBSA
  • Certifying rates with BFP annually (some exclusions may apply)
  • Ensuring compliance with university regulations and guidelines
  • Collaborating with unit staff, BFP, OCG (if selling to external customers), and CCO
  • Maintaining documentation for audits or reviews
  • Completing OCG RBSA setup processes (if selling to external customers)
  • Ensuring that services provided align with the approved scope and rates
  • Submitting DEPA annually

Your leadership is essential to the success and sustainability of the RBSA.

RBSA Feedback Form

Do you have ideas, questions, or feedback on the RBSA program? Please share your thoughts to help us improve and better serve you.

RBSA Feedback Form

Questions?

ÌýÌýContact rates@colorado.edu with any questions.Ìý
ÌýÌýNeed more support? Schedule an individual working session or small group training session for your unit by emailing rates@colorado.edu.

Primary Responsibilities of Finance and Department Research Administrators

If your role isÌýFinanceÌýorÌýDRAÌýrelated, you play a vital role in the ongoing management of RBSAs. Your responsibilities help ensure smooth operations and compliance with university policies. Key responsibilities include, but are not limited to:

  • Monitoring and managing RBSA financial activity
  • Ensuring rates are applied correctly and consistently
  • Assisting with journal entries, invoicing, revenue recognition, and account code correction
  • Coordinating with BFP, OCG (if selling to external customers), and CCO
  • Maintaining documentation for audits and internal reviews
  • Supporting the PI and unit in meeting compliance standards

RBSA Management

Changes to a RBSA

OCG Services and BFP must update compliance checks and documentation when certain aspects of the RBSA are changed.Ìý

Notify BFP and/or OCG Services when changes are made to an RBSA:

Email BFP when:

  • Closing or deactivating an RBSA
  • Adding, removing, or changing rates
  • A change in PI, including when the PI leaves CU or is on extended leave

Email OCG Services when (if RBSA has external customers):

  • Closing or deactivating an RBSA
  • A change in PI, including when the PI leaves CU or is on extended leave
  • Changes to the services being offered
  • A foreign national holding a visa who will be providing services

Communication and Compliance

If there are any changes made to the RBSA, such as updates to services, rates, equipment, or scope of work established in an accepted/signed contract, the PI in conjunction with the unit are responsible for notifying OCG Services and BFP of those changes.

RBSA Reorganization (REORG)

If a PI moves appointments, or a campus unit determines that an RBSA no longer supports that unit's mission, but another campus unit is willing to support the RBSA, the RBSA and its SpeedType will need to be moved from one unit to another (commonly referred to as a “reorg�).

RBSA reorganization involves more than moving a SpeedType, it will also require updates to the approved rate sheet before the new unit can make sales to internal and external customers, and updating any applicable documentation with OCG regarding equipment. If transfer of equipment is involved, OCG may need to redetermine the RBSA.

When is an RBSA Reorganization Needed?

An RBSA reorganization occurs when responsibility for operating the RBSA needs to transfer to a different organizational unit. Changes in the Principal Investigator (PI), Director, etc. does not necessarily constitute a reorganization of an RBSA.

Before the Reorganization

Before moving an RBSA, contactÌýrates@colorado.edu to discuss the planned change. Some of the following may be required:

  • A revised RBSA rate sheet reflecting the new organizational information
  • Moving speedtypes from one org to another
  • Coordination with OCG to update documents and contracts
External Customers

If the RBSA provides services to external customers, organizational changes may affect the existing service determinations. Changes should be reviewed by OCG.

You can contact OCG atÌýogcservicecontracts@colorado.edu.


Adding New Services or Equipment

If your RBSA sells to external customers, OCG Services must conduct determinations for each service offered utilizing any piece of capital equipment in an RBSA. Additional services and equipment can be added after the initial RBSA setup, butÌýa newÌý

  • New services are added to the RBSA
  • Adding new or existing equipment that was not previously determined to be used for the RBSA
  • Replacing equipment in the RBSA

For any RBSA, if you add a new service or equipment, you should also contactÌýbfp@colorado.edu to review your rates and discuss any changes needed to your rates.


Equipment Sales, Transfers and Surplus Property

If an RBSA has equipment or non-capital equipment, the RBSA may need to dispose of or transfer equipment to another campus unit, or determine what happens to the assets when an RBSA closes.

It is important to remember that equipment purchased with university funds isÌýuniversity property. Revenue generated by an RBSA is university revenue, and equipment purchased using those funds is owned by the University of Colorado, not by the Principal Investigator (PI) or Department. While PIs are entrusted to manage these resources responsibly, university assets cannot simply be sold, transferred, or repurposed without following established university property procedures.Ìý

The sale, transfer, or disposal of equipment typically involves one or both of the following campus offices:

  • Campus Controller's Office (CCO) Property Accounting – Generally responsible forÌýcapital (tagged) equipment and property records.
  • CU °Ç¸ç³Ô¹Ï Property Services – Generally responsible forÌýnon-capital (non-tagged) equipment, surplus property, equipment sales, and coordination of the disposal process.

In many cases, both CCO property accounting and CU °Ç¸ç³Ô¹Ï Property Services work together to ensure university property is properly accounted for before equipment is transferred, sold, or surplused.

Note: Property transactions are governed by university property procedures. Questions regarding property policy, procedures, or specific situations should be directed to property@colorado.edu (CCO's Property Accounting Office) and/or propserv@colorado.edu (CU °Ç¸ç³Ô¹Ï Property Services).

Selling Equipment

An RBSA may sell equipment it no longer needs. Property Services is required to sell or surplus sell the equipment on behalf of the unit.

Items that may be sold, but is not limited to may include:

  • Furniture, like chairs, desks, workstations, etc.
  • Computers, tablets, and peripherals.
  • Electrical components
  • Non-Capital equipment
  • Capital equipment

For sales of $100 or more, the RBSA selling the equipment will receive proceeds based on a sliding scale that can be foundÌýhere. Property services determines the appropriate sales method based on the equipment, but are happy to work with a department that has a specific buyer or resale value in mind.

Property services will coordinate the sale after all items have been submitted into the AssetWorks ReCoup system. This is the same for both capital and Non-capital equipment.Ìý

Transferring Equipment to Another CU Department

Equipment that is no longer being used for an RBSA may be transferred between campus units.

To transfer equipment,

If a PI Leaves the University

If a PI moves to another institution, equipment may only accompany the PI ifÌýit is associated with an active award that is transferring and the transfer has been approved by the Office of Contracts and Grants (OCG). Otherwise, the receiving institution would need to purchase the equipment.

If the PI moves to another company or startup, the company would need to purchase the equipment.

Sometimes, in very limited circumstances, the equipment may qualify for donation if all applicable university approvals are obtained. Please discuss with CCO's Property Accounting Office (property@colorado.edu) for additional information.


RBSA Administration

Being a Good Steward for Your Services

PI’s are responsible for maintaining and ensuring that all employees participating in their RBSA operations are also good stewards. This means,

  • Ensure campus policies are being followed. This means having oversight of your RBSA. You cannot be hands-off!
  • Employees have been informed of their responsibilities in fiscal roles and responsibilities inÌý.
  • Regularly reviewing your finances with your unit to ensure that expenses are aligned with your operations, and that no inappropriate or unallowable expenses accrue.

Invoicing and Payment Collection

Units with RBSAs are responsible for invoicing and payment collection, including maintaining and documenting all issued invoices (for both internal and external customers). Depending on the terms and conditions established in conjunction with OCG Services, different payment terms for external customers may be established.

Advanced or Upfront Payment:

Units may choose to request full or partial payment before services are performed for external customers. If you prefer this option, be sure to informÌýOCG ServicesÌýduring the RBSA setup process so the payment terms can be reflected accurately in the contract. BFP recommends this if the customer is able to agree to those terms.

If you opt to do advanced or upfront payment,Ìýyou may need to consider recording this as unearned revenue until the goods or services have been provided. Please reach out to your campus accountant for the proper accounting steps.

NET Payment Terms:

For external customers. The standard term isÌýNET 30 (payment due 30 days from the invoice date). However, units may select a different NET term that suits their needs. Communicate your preferred terms toÌýOCG ServicesÌýduring the RBSA setup process.


Graphic showing the lifecycle of an RBSA

The RBSA Lifecycle

Certifying and Recertifying Rates with Budget and Fiscal Planning

and theÌý prohibits the university from subsidizing external customers. This means BFP must ensure all service activities are at a minimum cost recovery rate. To do this, the unit must certify rates with BFP by the beginning of each fiscal year (July 1st). There are a few exceptions, see below.

To ensure rates are certified by the beginning of each fiscal year, BFP conducts an annual rate certification in the spring of every year, starting in January. The rate sheet submission deadline for the annual rate certification is April 30th of every year.

Any RBSA that does not recertify would be considered delinquent and out of compliance and may be shut down.

Ìý

Annual Recertification Based on Customer Type and Annual Sales

If there is a mix of customer types, use the guidelines below for the highest risk level for when you should be recertifying your RBSA.

Note: Sales are revenue coming into the RBSA, not the net profit. Net profit is defined as (Revenue – Expenses) and is not the same as annual sales.

If rates are added at any time, the RBSA must be re-determined by OCG service contracts and the rates recertified by BFP.

Annual SalesInternal CustomersFederal CustomersExternal Customers
Less than $10K Ìý Ìý Ìý Ìý Ìý Ìý Ìý Ìý Ìý Ìý Ìý Ìý Ìý ÌýRisk: Low
No rate submission required
Risk: High
Rate submission is required annually Ìý ÌýÌý
Risk: High
Rate submission is required annually Ìý ÌýÌý
$10K - $500KRisk: Medium
Rate submission is required at least every two years
Risk: High
Rate submission is required annually

Risk: High
Rate submission is required annually

Greater than $500KRisk: High
Rate submission is required annually
Risk: High
Rate submission is required annually
Risk: High
Rate submission is required annually

Quote Authority Delegation

If the unit wishes to be set up for quote authority delegation, the unit will haveÌýadditional responsibilities as well as theÌýstandard RBSA maintenance.

"Quote authority" is the authority to issue quotes without going through OCG Services. This is an optional delegation made by OCG Services, and not every RBSA is eligible. More information can be found onÌýOCG’s Service Quotation Authority page.

Steps to Closing Out an RBSA

When you have determined it is time to close your RBSA, it is important to ensure that proper steps are taken to ensure a successful close-out of your RBSA.

Important: If you want to deactivate an RBSA, the speedtype should not be repurposed for other uses. It should always be tied to your RBSA, even if it was inactivated!

More information about RBSA close-out can be found on theÌýChapter 13 Departmental Financial Guide.

Notify BFP and OCG to let them know you no longer want to keep your RBSA active. This will start the inactivation process.

Note: RBSA’s are not tied to a specific project. So even though one agreement comes to an end, the RBSA can stay active and sell the same services to other customers. All OCG setup processes have to be re-done when closed RBSAs decide they want to reinitiate sales to external customers.

Double-check that the SpeedType will not incur outstanding charges for the following month, including Fringe, GAIR. A good way to check if a SpeedType will have an incoming expense for Fringe and GAIR is to look at the encumbrances by using the m-FIN Outstanding Encumbrances report.

If the SpeedType is in deficit, you will want to account for any potential PIE charges. For more details about campus PIE, visitÌýCCOs website.

Remaining balances (positive or negative) cannot be closed out by CCO. All SpeedTypes need to net zero before it is closed out. Because RBSAs may not charge internal customers more than the cost of the goods or services they provide and are intended to break even, they cannot be shut down if a surplus or deficit balance exists.

Resolving Deficits

If your RBSA has a cash deficit, the department must resolve the deficit before having the SpeedType deactivated. There are a couple of ways you can do this:

  • Transfer in cash from the Fund 78 reserve (if available).
  • Transfer expenses from the Fund 28/29 to a discretionary SpeedType (like a Fund 10 or 11).
  • Transfer in cash from another Fund 2X SpeedType, like a 20 or 26.
    • Federal cost principles prohibit the use of a surplus in one internal RBSA to fund the deficits of other internal RBSAs or other operations.

Resolving Surpluses

If your RBSA has a cash surplus, the type of customer from whom the revenue came will dictate how the money is handled.

External Profit:

Any surplus generated from external customers is considered external profit. This can be transferred over to another Fund 29 or 78 for discretionary use.

Internal Surplus:

Any surplus generated from internal and federal customers is NOT considered external profit and should not be moved to another SpeedType outside of its Fund 28/78 pair.

After all applicable profit transfers have been made, the balance that is in excess of the 60 day reserve should be refunded to the internal customers on a pro-rata basis. The refund should be allocated based on charges to all internal customers in the last 12 months.

Using the m-FIN Balance Sheet Summary, run a report for your RBSA SpeedType and ensure there are no remaining assets or liabilities. Any remaining assets or liabilities can prevent your SpeedType from being closed out.

  • If there are non-cash assets like Accounts Receivable or remaining Liabilities, such as Accounts Payable. Contact your campus accountant for assistance in resolving those account balances.

EmailÌýCCO Accounting to close out the Fund 28/29 RBSA SpeedType and its associated Fund 78.

When the SpeedType is closed out, update BFP and OCG to let them know that the SpeedType is fully closed out.

FAQ

Unfortunately, this does happen from time to time. If this does occur, please contact OCG Services for guidance. Since a lot of RBSAs have worked for internal or federal customers, many RBSAs don’t think about asking for payment up front with external customers. When dealing with external customers, you have the option to set up advanced payment terms. We recommend using advanced payment terms with external customers. You can also ask for partial payment up front, or payment at various milestones before work can continue, and have it incorporated into the contract. This is to help manage the risk of the customer not paying.

Also, depending on how far in advance the payment is made, you may need to consider recording this as unearned revenue until the goods or services have been provided. Please reach out to your campus accountant for the proper accounting steps.

It depends. If the RBSA is internal only. Then OCG is not involved. The only time OCG would need to get involved is if you’re selling to an external customer. If that happens, then a formal determination would need to occur.

If the RBSA has external customers, then OCG must be involved, meaning, you must complete a determination, regardless of whether the equipment is new or already in your lab.

Why is this required?

There may be existing terms and conditions tied to the equipment that could conflict with your intended use. For example:

  • The equipment might be on loan from another institution or organization where the intended use is for sponsored research
  • There could be a Material Transfer Agreement (MTA) in place that restricts non-research or commercial use
  • The sponsored research for which the equipment was purchased for might have terms and conditions in its agreement, like property deposition terms, or it might become federal property after the conclusion of the grant

It depends.

  • If you remove services:

    You should notify OCG to let them know that changes were made to the RBSA. You should contact BFP to recertify your rates to reflect the removal of services.

  • If you’re adding new services:

    You should submit a redetermination with OCG. You should contact BFP to recertify your rates to reflect the addition of services after the redetermination is complete.

  • If you are changing or consolidating your rates, and the rates provide the same service as originally approved by OCG in the determination (with no new rates added outside of that determination):

    You do not need to involve OCG. However, BFP will need to recertify the new consolidated rates.

If you’re unsure, please contactÌýOCG Services for guidance.

You’re welcome to submit an updated RBSA sheet toÌýrates@colorado.edu at any point during the year.

Yes, but that does not relieve you of your responsibility for overseeing the RBSA. According to Regent policy (), Fiscal Principals, also known as Chairs & Directors (or equivalent) and Principal Investigators, are entrusted with fiscal responsibility for their assigned units.

Each sponsored project (including RBSAs) has an identified PI or Faculty member charged with the responsibility for the administration and fiscal oversight of the sponsored project, and is entrusted with the fiscal responsibility for their assigned services.

If you’re unable to submit your annual rate certification by April 30, the RBSA review team in BFP cannot guarantee your new rates will be certified in time for the start of the new fiscal year. You should still submit the rate sheet even if it is late. BFP will still need to certify your rates, even if that falls after the new fiscal year.

No.

Quote authority isÌýassigned to specific individuals. For example, ifÌýthe PI of the labÌýhas quote authority, only the PI is the one that can submit quotes.

Only the individual who has been formally granted quote authority may issue quotes. This ensures accountability and compliance with university procedures.

Reach out to OCG Services for more information about Quote Authority.

No. If a customer requests to use their quote contract template,Ìýyou must send it to OCG Service Contracts for review and negotiation. Units areÌýnot authorized to sign customer generated standard terms and conditions. SeeÌýOCG's website for further instructions.

It depends on the type of encumbrance that is listed.

Payroll Encumbrance – This means that you have an employee who has funding distributed to your SpeedType. You should submit a Funding Change in HCM or work with your department's HR Liaison or Finance Staff to submit the Funding Change for the affected employee.

PO Encumbrances – This means that you have an open purchase order where a vendor has not submitted an invoice for payment in CU Marketplace. This can occur because:

  • Vendor cancelled the order, and the PO was never closed with the PSC.
  • Goods or services were received, but the vendor never submitted an invoice for payment toÌýapinvoice@cu.edu.
  • Purchase order is still active and goods or services have not been received yet.

Reach out toÌýchangeorder@cu.edu for assistance.

SPO Encumbrance – This means that you have an open standing purchase order (blanket purchase order (BPO)). If the SPO/BPO is no longer needed, or needs to be established on another SpeedType, reach out toÌýchangeorder@cu.edu for assistance